Police Tear-drop

Maximum Weight Rating: 135kg

Heavy Duty 3-Lever Independent Mechanism with Adjustable Seat Height, Seat Tilt and Back Angle

High Back:

• Height: 530mm
• Width: 400mm
• Adjustable Back Angle
• Manual Height Adjustment
• Upholstered Back Outer
  

2XL Injection Moulded Contoured Seat: 

• Depth: 520mm (The depth of the seat surface is the maximum horizontal distance between vertical lines through the front and rear edges of the seat surface)
• Width: 570mm
• Seat Height Range: 450-560mm 
• Adjustable Seat Height
• Adjustable Seat Tilt

Gas Lift: 140mm (Approximate Seat Height Range: 420-545mm)

Base: 5-Star Black Nylon Base

Castors: 45mm

Fabric: Black Sustainable Renegade Deserter Srg15 (EWP House Fabric) – 100% Eco-polyester; GECA Environmental Certification; Commercial Heavy Duty Upholstery Fabric; Made in Australia; 12 Year Warranty. (For customized upholstery, please choose Fabric/s from Sustainable Living Fabrics Sustainable Renegade Range – no additional charges apply, or Sustainable Living Fabrics – additional charges apply.  For customized upholstery, please allow 2-6 Weeks for Manufacture and Delivery.  A small variation of the final seat size may occur depending on the upholstery chosen.)

Australian made

Purchase Includes: 1 x Police Tear-drop (High Back, 2XL Seat) Task Chair as selected fully assembled and ready to use

If you require any support with this product, Chat, email [email protected] or phone us on 0403 693 780.

Australia Wide: 2-4 Weeks.  Please note, longer delivery time frames can sometimes occur.

The chair is made to order, but if we happen to have the chair required in stock and delivery is local, delivery can occur within 3 weekdays.

Need it urgently or want to know when you will receive your order?  Check with us before placing your order.  Chat, email [email protected] or phone us on 0403 693 780.

Troubleshooting:

Issue: How to adjust the back of the chair

The back of the chair is on a ratchet which is designed for adjustment of the back height (up and down).  Usually, the ratchet will have 6 – 7 clicks of adjustment, or have a Multi-click Mechanism that has a higher number of smaller click adjustments.  Once the back reaches the top/highest notch, the back will drop down to allow the user to reset the height.

To reset the back of the chair, take the back all the way to the bottom and then raise it click by click, counting the clicks as you go, until it drops.  On the last click, before the back drops, is the maximum height the back can be set to.  This is harder to do on the Multi-click Mechanism.

Some people adjust the back while seated and raise it past the height of the last notch.  Because the person’s back is in contact with the backrest, the back may not drop until the person moves their back away from the chair.  Some people push back into their chair while seated, or accidentally raise the back when getting out of the chair.

If the back will not lock into position, repair is required.  To confirm, try raising the back a few notches from the lowest height position and push down on the backrest.  If it does not hold that position, the back is faulty.

If you are having any issues with this product, Chat, email [email protected] or phone us on 0403 693 780.

Warranty: 10 Years (Standard Use – 8 hour usage per day, 5 days per week)

End of Life – reducing our environmental impact

This product has a full product stewardship programme for recycling at 5 locations – Sydney, Melboure, Brisbane and Perth.

• Foams are crumbed and become carpet underlay
• Steel components are melted down for re-use
• Alloy is recycled
• All plastic and nylon parts are sorted into resin codes (eg. PP05 or PPK20) for recycling

The Environment

The following table shows the ‘end-of-life’ properties of the chair:

During this period, the Chair’s manufacturer will undertake to complete all warranty repairs at no charge, and on a prompt basis.

Please note, any repair that has been caused by anything other than acceptable wear and tear, will not be deemed as a warranty issue – and we will therefore provide you with a quotation for any required works, prior to the commencement of those repairs.

If you believe the chair is faulty, please refrain from using the chair. Damage that occurs as a result of continued use of a faulty product will not be covered under warranty. 

What do I do if the chair is faulty?

1. Cease using the chair as it may be unsafe to use.  Damage that occurs as a result of continued use of a faulty product will not be covered under warranty.  

2. Complete and return the Product Repair Request form