bStrong

Maximum Weight Rating Options:

• 200kg
• 250kg

Heavy Duty 3-Lever Ergo Mechanism with Adjustable Seat Height, Seat Tilt, Back Height and Back Angle

Back Size Options:

Medium Back:

• Height: 445mm
• Height Range: 80mm
• Width: 430mm
• Height Adjustable
• PU Foam
• Lumbar Pump
• Upholstered Front
• Moulded Polypropylene Outer

High Back:

• Height: 520mm
• Height Range: 80mm
• Width: 440mm
• Height Adjustable
• PU Foam
• Lumbar Pump
• Upholstered Front
• Moulded Polypropylene Outer

PU Foam Flat HydroTEQ Seat Size Options:

• Depth: 450mm or 520mm
• Width: 600mm (200kg) or 700mm (250kg)
• Height adjustable
• Tilt lockable
• Optional Coxxyx cutout 

Optional Armrests: 1D Height Adjustable

HD Gas Lift: Two Stage 120mm, Seat Height Range 480-600mm

Heavy Duty 6-Star Polished Base

Castor Options:

• 80mm Heavy Duty
• 50mm Pressure Lock
• 50mm Pressure Release

Fabric: Black Apollo (House Black Fabric) with Black Feature Stitching (Standard) – 100% Polyester; woven crepe fabric (inherent stretch properties with exceptional regain); weight of 395gsm; in excess of 130,000 cycles (800g/12kpa) Martindale; Fastness to light 5+; Fastness to rubbing, wet 5 and dry 4.5; Flammability, BS EN 1021-1:1994 (Cigarette), BS EN 1021-2:1994 (Match), BS7176:1995 Low Hazard, Californa TB117 Section E; 5 Year Limited Warranty for normal use (8hrs p/day) and wear and tear.  Warranty covers workmanship in the production of the fabric.  Warranty does not cover misuse and abuse including, but not limited to, chemical exposure/cleaning agents, cuts, burns or wilful damnage caused by people or pets.  Warranty is only for the original owner of the furniture that the chair was sold to.

For customized upholstery, for no additional charge, Fabrics can be chosen from Laine Rave (100% Eco-polyester; GECA Environmental Certification; Commercial Heavy Duty Upholstery Fabric; Made in Australia; 12 Year Warranty) or Sustainable Living Fabrics Sustainable Renegade Range (100% Eco-polyester; GECA Environmental Certification; Commercial Heavy Duty Upholstery Fabric; Made in Australia; 12 Year Warranty).  Additional charges apply for other customized Fabrics.  Please allow 4-6 Weeks for Manufacture and Delivery.  A small variation of the final seat size may occur depending on the upholstery chosen.) 

Australian Designed & Made: Manufactured in Melbourne, Victoria

Purchase Includes: 1 x bStrong Task Chair as selected fully assembled and ready to use

If you require any support with this product, Chat, email [email protected] or phone us on 0403 693 780.

Australia Wide: 1-4 Weeks.  Please note, longer delivery time frames can sometimes occur.

Need it urgently or want to know when you will receive your order?  Check with us before placing your order.  Chat, email [email protected] or phone us on 0403 693 780.

Troubleshooting:

Issue: How to adjust the back of the chair

The back of the chair is on a ratchet which is designed for adjustment of the back height (up and down).  Usually, the ratchet will have 6 – 7 clicks of adjustment, or have a Multi-click Mechanism that has a higher number of smaller click adjustments.  Once the back reaches the top/highest notch, the back will drop down to allow the user to reset the height.

To reset the back of the chair, take the back all the way to the bottom and then raise it click by click, counting the clicks as you go, until it drops.  On the last click, before the back drops, is the maximum height the back can be set to.  This is harder to do on the Multi-click Mechanism.

Some people adjust the back while seated and raise it past the height of the last notch.  Because the person’s back is in contact with the backrest, the back may not drop until the person moves their back away from the chair.  Some people push back into their chair while seated, or accidentally raise the back when getting out of the chair.

If the back will not lock into position, repair is required.  To confirm, try raising the back a few notches from the lowest height position and push down on the backrest.  If it does not hold that position, the back is faulty.

If you are having any issues with this product, Chat, email [email protected] or phone us on 0403 693 780.

Warranty:

7 Years (Standard Use – 8 hour usage per day, 5 days per week)

3 Years (24/7 Extended Use)

Fabric: 5 Year Limited Warranty for normal use (8hrs p/day) and wear and tear.  Warranty covers workmanship in the production of the fabric.  Warranty does not cover misuse and abuse including, but not limited to, chemical exposure/cleaning agents, cuts, burns or wilful damnage caused by people or pets.  Warranty is only for the original owner of the furniture that the chair was sold to.

During this period, the Chair’s manufacturer will undertake to complete all warranty repairs at no charge, and on a prompt basis.

Please note, any repair that has been caused by anything other than acceptable wear and tear, will not be deemed as a warranty issue – and we will therefore provide you with a quotation for any required works, prior to the commencement of those repairs.

If you believe the chair is faulty, please refrain from using the chair. Damage that occurs as a result of continued use of a faulty product will not be covered under warranty. 

What do I do if the chair is faulty?

1. Cease using the chair as it may be unsafe to use.  Damage that occurs as a result of continued use of a faulty product will not be covered under warranty.  

2. Complete and return the Product Repair Request form